What is PFMEA (process failure mode and effects analysis)?

    Short answer

    PFMEA (process failure mode and effects analysis, sometimes typed PMFEA) is a team method for finding how each step of a manufacturing or assembly process could fail, what the failure would do to the customer, what causes it and what controls catch it. Each risk is rated for severity, occurrence and detection so the worst are fixed first.

    Last updated · TeamAssurance

    What does PFMEA stand for?

    PFMEA stands for process failure mode and effects analysis. PMFEA is a common mistyping of the same thing. It is one type of FMEA: a design FMEA (DFMEA) asks how the product design could fail, while a PFMEA assumes the design is right and asks how the process could make the part wrong. IATF 16949 requires it in automotive, and AS13004 covers it for aerospace.

    What are the 7 steps of a PFMEA?

    The AIAG-VDA FMEA Handbook (2019) sets seven steps:

    1. Plan and prepare. Agree the scope, the team and the timing.
    2. Structure analysis. Break the process into steps, using the process flow diagram.
    3. Function analysis. State what each step must achieve.
    4. Failure analysis. For each step, list the failure mode, its effect and its cause.
    5. Risk analysis. Rate severity (S), occurrence (O) and detection (D) from 1 to 10, then read off the action priority: high, medium or low.
    6. Optimisation. Assign actions with owners and dates to prevent the cause or detect it sooner, then re-rate.
    7. Document the results and share them.

    What does a PFMEA example look like?

    Process stepFailure modeEffect (S)Cause (O)Current control (D)Action
    Weld bracketWeld too shortBracket detaches in use (8)Wire feed blocked (3)Visual check each shift (7)Weld monitor that stops the cell
    Apply labelWrong labelCustomer receives mislabelled part (6)Similar labels stored together (5)Scan at packing (3)Store labels by part number

    How does a PFMEA link to the control plan?

    The documents form a chain: the process flow diagram lists the steps, the PFMEA finds the risks in each step, and the control plan records the checks and mistake-proofing that hold those risks down. Those checks then go into the operators' standard work and are verified by layered process audits.

    When should a PFMEA be updated?

    • Before a new process or product starts production.
    • When the process, equipment, material or design changes.
    • After a customer complaint, defect or near miss shows a failure mode that was missed or under-rated.

    To start one, use the FMEA template, which has the worksheet columns and rating scales.

    How TeamAssurance helps

    In TeamAssurance, the actions from a PFMEA are tracked on the team's board with owners and due dates, the controls it relies on run as scheduled checks and layered audits, and the defects and near misses raised daily give the team the evidence to revisit the ratings.

    Frequently asked questions

    Is PMFEA the same as PFMEA?

    Yes. PMFEA is a common misspelling of PFMEA, process failure mode and effects analysis. There is no separate method called PMFEA.

    Who should be on a PFMEA team?

    A cross-functional team led by the process or manufacturing engineer, with quality, maintenance and the operators who run the process. People who do the work know failure modes that never reach a report.

    Does a PFMEA still use the risk priority number (RPN)?

    Many companies still multiply severity, occurrence and detection into an RPN. The AIAG-VDA handbook replaced it with an action priority table, so that a high-severity failure is acted on even when it is rare.