What are environmental hazards?

    Short answer

    Environmental hazards are conditions in the surroundings that can harm people, property or the natural environment. At work they are grouped as physical (noise, heat), chemical (fumes, spills), biological (bacteria, mould), ergonomic (poor layout) and natural (flood, bushfire). They are found by inspection and hazard reporting, then controlled using the hierarchy of controls.

    Last updated · TeamAssurance

    Key facts

    • Five common types: physical, chemical, biological, ergonomic and natural.
    • Two meanings: harm to people in the work environment, and harm a site causes to air, water and land.
    • Found by: workplace inspections, worker hazard reports, incident reviews and monitoring.
    • Controlled by: the hierarchy of controls, from elimination down to PPE.

    What are the main types of environmental hazard?

    TypeExamplesTypical harm
    PhysicalNoise, vibration, heat, cold, radiation, poor lighting, wet floorsHearing loss, heat stress, falls
    ChemicalFumes, dust, solvents, fuel and chemical spillsBurns, breathing problems, contamination
    BiologicalBacteria, viruses, mould, insect and animal bitesInfection, allergic reactions
    ErgonomicAwkward posture, repetitive tasks, poor workstation layoutStrains, long-term musculoskeletal injury
    NaturalStorms, flood, bushfire, extreme heatInjury, site shutdown, property damage

    What is the difference between workplace and ecological hazards?

    In work health and safety, environmental hazards are conditions in the work environment that can injure people or make them ill. In environmental management, the term also covers harm a site causes beyond its fence, such as emissions, spills to waterways, waste and contaminated land. Many sites manage both, because one chemical spill can be a worker hazard and a pollution event at the same time.

    What is an example of an environmental hazard at work?

    A forklift punctures a drum of solvent in a warehouse. Vapour builds up in a poorly ventilated aisle (a chemical hazard), the spill makes the floor slippery (a physical hazard), and if it reaches a stormwater drain it becomes an ecological hazard too. The controls are bunded storage away from traffic, ventilation, a stocked spill kit and trained responders.

    Which standards apply?

    Duties come from work health and safety law, such as the model WHS Act in Australia, and from environmental protection law for site impacts. Many organisations also run an environmental management system to ISO 14001. Requirements differ by state and country, so confirm them with your regulator.

    How TeamAssurance helps

    In TeamAssurance, workers report hazards from the frontline with photos, and area inspections such as housekeeping, spill kit and chemical storage checks run as scheduled checklists. Each hazard or failed check becomes an action on the tier board with an owner and due date until it is controlled.

    Frequently asked questions

    What are the four main types of environmental hazard?

    The four most common groups are physical, chemical, biological and ergonomic hazards. Many lists add natural hazards such as flood and bushfire, and some add psychosocial hazards such as workplace stress.

    Is noise an environmental hazard?

    Yes. Noise is a physical environmental hazard. Long exposure to loud noise at work causes permanent hearing loss, so it is controlled with quieter equipment, enclosures, job rotation and hearing protection.

    Who is responsible for controlling environmental hazards at work?

    The employer, or person conducting the business, must eliminate or minimise risks so far as is reasonably practicable. Workers must follow safe procedures and report the hazards they see.